MAGNUM® MDM6IS1224 Deadman Plate Anchor

12″ x 24″ x 0.125″ Deadman Plate Anchor w/ #6 GR75 Threadbar Anchor Rod

Data Sheet

SKU: MDM6IS1224 Category:

This product is currently out of stock and unavailable.

Additional information

Weight 1 lbs
Dimensions 1 × 1 × 1 in
Deadman Plate

12" x 24" x 1/8" Steel Plate ASTM A36 GR36

Threadbar

#6 Grade 75

Allowable Tensile Capacity (tons)

8

Coating

,

Description

The Magnum MDM6IS1224 Deadman Plate Anchor consists of a 12″ x 24″ by 0.125″ thick formed and reinforced steel plate with #6 GR75 threadbar and can support working loads up to 8 tons in tension. The post is designed in accordance with IBC, ACI, and AISC codes. Design and detailing of the anchor varies by project and is the responsibility of registered design professional including minimum length of threadbar, anchor spacing, and working load in ground.

Installation Note:
Layout required anchor locations. Excavate pit on exterior of basement to accommodate plate anchor. Drill 1 inch diameter hole through basement wall or other retaining wall. Drive #6 thread bar horizontally through wall until it daylights in excavated pit. Driving can be done by hand using sledge hammer in soft or loose soils or using a small jackhammer in more dense materials. Attach deadman plate anchor to threadbar using appropriate hex nut. Backfill excavated pit using soil, structural fill, or lean concrete (flow fill) as specified by design professional. Post-tension plate anchor and load test, if required. Lock off to basement wall using Magnum bearing plate and hex nut.

All Magnum Products Made in U.S.A.
U.S. Patents 6,058,662 and 5,234,287; Other Patents Pending. NOTE: Many items made to order. Bulk discounts available. Contact Magnum representative regarding price and availability.