MHC1040-4B Bond Bar Cap Allowable Capacity 36 Tons

MHC1040-4B bond bar cap has 72 tons ultimate capacity, 36 tons allowable capacity in compression and tension. The bond bar cap consists of a collar tube with bolt hole for connection to Magnum helical piles. It Includes vertical reinforcing steel bars for attachment to cast-in-place concrete for new construction and foundation augmentation. The bond bar cap is designed in accordance with ICC-ES document AC358 as well as IBC, ACI, and AISC codes. Design and detailing of the structure to which the helical pile cap is attached varies by project and is the responsibility of registered design professional including minimum concrete cover for one-way shear, two-way punching shear, and bearing.

Additional information

Allowable Compression/ Tension (Tons)

36 Tons / 36 Tons

Ultimate Compression/Tension (Tons)

72 Tons / 72 Tons

Helical Pile Compatibility

https://www.magnumpiering.com/products/mh429u-helical-piles/
https://www.magnumpiering.com/products/mh434u-helical-piles/

Description

After installation of a MAGNUM® Helical Pile to the correct depth, torque, and capacity, begin by cutting-off the pile shaft at the proper elevation. Drill (2) 1-5/16” holes using the MAGNUMM® drill template. Place the pile cap over the shaft and secure with (2) 1-1/4” bolts. Snug tighten nuts. Alternatively, drilling through pile may be omitted and plug welds may be used to secure cap to pile in place of bolts, see MAGNUM® Technical Bulletin TB004.0. Place reinforcing steel as required for the project and cast concrete over and around the pile cap.