MHC1160-35B 4×4 Post Cap Allowable Capacity 8 Tons

MHC1160-35B 4×4 post cap consist of a collar tube with bolt holes for connection to MAGNUM® helical piles and a circular bearing plate with an integrated nut. MAGNUM® products are manufactured in the USA according to our ISO 9001 approved quality program. Structural capacities are developed according to AISC 360 considering an average design life of 75 years for hot-dip galvanized steel in most soil conditions. Bare steel is available upon request. Design and detailing of the structure, to which bearing plate cap is attached varies by project. It is the responsibility of the registered design professional.

Additional information

Allowable Compression/ Tension (Tons)

8 Tons / 8 Tons

Ultimate Compression/Tension Tons

17 Tons / 17 Tons

Helical Pile Compatibility

https://www.magnumpiering.com/products/mh3521u-helical-piles/
https://www.magnumpiering.com/products/mh3530u-helical-piles/

Description

After installation of a Magnum Helical Pile to the correct depth, torque, and capacity, cut-off the pile shaft at the proper elevation. Drill 1-1/16” hole using a Magnum drill template. Place the pile cap over the shaft and secure with (1) 1” bolt. Snug tighten nut. Place wood post on post base and secure with 1/4” lag bolts as required for the project.

You may also like…