MAGNUM® MP1006-3 Reverse Angle

Call for a Quote

In Stock

8″ x 8″ x 24″ x 1/2″ Angle with (16) 11/16″ Thru Holes & 3.13″ I.D. Collar

Data Sheet

Clear
SKU: MP1006-3_ Category:

Description

The Magnum MP1006-3 reverse angle bracket has 50 tons maximum ultimate capacity, 25 tons working capacity in compression and tension. The bracket consists of a collar tube with (3) 3/4? threaded bolt holes for connection to Magnum push piers and (16) thru holes for attachment to existing concrete using expansion anchors. The bracket is designed in accordance with IBC, ACI, and AISC codes. Design and detailing of the connection
to the structure varies by project and is the responsibility of registered design professional including maximum concrete span, pier spacing, concrete shear, and concrete bearing.

Installation Notes:
Prepare the existing foundation. Core a 3.50? diameter or larger hole through the footing or slab where the push pier is located. Attach the bracket and Magnum ram. Install the push pier through the core hole to the required
pressure and load test. Lift the structure as needed using either a Magnum ram or lifting fixture. Drill holes and bolt the bracket to the pile.

*Bracket connection to pile consists of field threaded blind bolts as described in Section 7-13 of AISC Code. Capacities shown are based on IAS accredited laboratory testing of Magnum products

Additional information

Weight 1 lbs
Dimensions 1 × 1 × 1 in
Fits Pile Shaft Designation

MP313, MP325

Collar Tube

0.37 in. x 3.13 in. I.D. ASTM A513 GR65

Configuration

8" x 8" x 24" x 1/2" Angle with (16) 11/16" Thru Holes for 5/8" Expansion Anchors

Pile Connection

(1, 2, or 3) 3/4" SAE J429 GR8 Zinc Coated to ASTM B695/F1941

Bracket Type

Reverse Angle

Allowable Tensile Capacity (tons)

25

Allow. Comp. Capacity (tons)

25

Coating

,

Reviews

There are no reviews yet.

Be the first to review “MAGNUM® MP1006-3 Reverse Angle”

Your email address will not be published. Required fields are marked *