MAGNUM® MP1016-3 Angle Bracket w/ Tie Back

Call for a Quote

In Stock

8″ x” 8″ x 24″ x 1/2″ Angle with (18) 9/16″ Thru Holes and 3/13″ I.D. Collar

Data Sheet

Clear
SKU: MP1016-3_ Category:

Description

The Magnum MP 1016-3 pivot angle bracket has 50 tons ultimate capacity, 25 tons allowable capacity in compression and tension. The bracket consists of a collar tube with (3) 3/4″ threaded bolt holes for connection to Magnum helical piles and Magnum push piers and bolt holes for attachment to existing concrete using expansion anchors. The bracket is designed in accordance with ICC-ES document AC358 as well as IBC, ACI, and AISC codes. Design and detailing of the connection to the structure varies by project and is the responsibility of registered design professional including maximum concrete span, pier spacing, concrete shear, and concrete bearing.

Installation Notes:

Prepare the existing foundation. For steel push pier applications, apply a grout bed of high strength, fast setting, non-shrink grout at a minimum of 1/2″ thick to the bottom angle face, then attach the bracket and Magnum ram. Install the push pier to the required pressure and load test. For helical pile applications, excavate the pier location so the helix bearing plates fit below the existing foundation and the shaft is as close as possible to the face of the foundation. Install the helical pile to the correct depth and torque. Apply a grout bed of high strength, fast setting, non-shrink grout at a minimum of 1/2″ thick to the bottom angle face, then mount the bracket and install the sleeve. In both cases, lift the structure as needed using either a Magnum ram or lifting fixture. Drill holes and bolt the bracket to the pile.

*Bracket connection to pile consists of field threaded blind bolts as described n Section 7-13 of AISC Code. Capacities shown are based on? IAS accredited laboratory testing of Magnum products.

All Magnum Products Made in U.S.A.
U.S.Patents 6,058,662 and 5,234,287; Other Patents Pending.

Additional information

Weight 1 lbs
Dimensions 1 × 1 × 1 in
Fits Pile Shaft Designation

MH313B, MH313BR, MH325B, MH325B(-6), MP313, MP325

Collar Tube

0.37 in. x 3.13 in. I.D. ASTM A513 65 ksi or Better

Configuration

8" x 8" x 21" x 1/2" Angle with (18) 9/16" Thru Holes for 1/2" Expansion Anchors

Pile Connection

(1, 2, or 3) 3/4" SAE J429 Grade 8 Zinc Coated to ASTM B695/F1941

Bracket Type

Angle, Tie Back

Allowable Tensile Capacity (tons)

25

Allow. Comp. Capacity (tons)

25

Coating

,

Reviews

There are no reviews yet.

Be the first to review “MAGNUM® MP1016-3 Angle Bracket w/ Tie Back”

Your email address will not be published. Required fields are marked *