Copy of MSC1040-175B Bond Bar Cap Allowable Capacity 27.5 Tons

MSC1040-175B Bond Bar Cap (steel cap) consist of a collar tube with bolt hole for connection to MAGNUM® helical piles and vertical reinforcing steel bars for embedment in cast-in-place reinforced concrete. MAGNUM® products are manufactured in the USA according to our ISO 9001 approved quality program. Structural capacities are developed according to AISC 360 and ACI 318 considering an average design life of 75 years for bare steel in most soil conditions. Hot-dip galvanizing is available upon request. Design and detailing of the structure to which bearing plate cap is embedded in varies by project and is the responsibility of the registered design professional.

Categories: , Tag:

Additional information

Allowable Compression/ Tension (Tons)

27.5 Tons / 27.5 Tons

Ultimate Compression/Tension Tons

55 Tons / 55 Tons

Helical Pile Compatibility

https://www.magnumpiering.com/products/ms175b-helical-pier/

Description

MSC1040-175B Bond Bar Cap

After installation of a MAGNUM® Helical Pier to the correct depth, torque, and capacity, cut-off the pile shaft at the proper elevation. Drill (1) 15/16” diameter hole through the shaft using a MAGNUM® drill template. Place the cap over the shaft and secure with (1) 7/8” bolt. Snug tighten nut. Reinforcing steel development length to be checked by registered design professional. Place reinforcing steel, cast concrete and consolidate around the pile cap per project requirements