MHC1040-3BR2 Bond Bar Cap
MHC1040-3BR2 Bond Bar Cap consists of a collar tube with bolt hole for connection to Magnum helical piles. Including vertical reinforcing steel bars for attachment to cast-in-place concrete for new construction and foundation augmentation. The bond bar cap is designed in accordance with ICC-ES document AC358 as well as IBC, ACI, and AISC codes. Design and detailing of the structure to which the helical pile cap is attached varies by project. It is the responsibility of registered design professional including minimum concrete cover for one-way shear, two-way punching shear, and bearing.
Additional information
Allowable Compression/ Tension (Tons) | 19 Tons / 19 Tons |
---|---|
Ultimate Compression/Tension (Tons) | 38 Tons / 38 Tons |
Helical Pile Compatibility | https://www.magnumpiering.com/products/mh325br-6-helical-piles/ |
Description
MHC1040-3BR2 Bond Bar Cap
After installation of a MAGNUM® Helical Pile to the correct depth, torque, and capacity, cut-off the pile shaft at the proper elevation. Drill (2) 1-1/16” diameter holes through the shaft using a MAGNUM® drill template, place the cap over the shaft and secure with (2) 1” bolts. Snug tighten nuts. Reinforcing steel development length to be checked by registered design professional. Place reinforcing steel, cast concrete and consolidate around the pile cap per project requirements.