MHC1300-3K55B Bearing Plate Cap Allowable Capacity 16 Tons

MHC1300-3K55B bearing plate cap has 32 tons ultimate capacity, 16 tons allowable capacity in compression. 18 tons ultimate capacity, 9 tons allowable capacity in tension. The bearing plate cap consists of a collar tube with bolt hole for connection to Magnum helical piles. This includes  5” x 5” x 3/8” plate for embedment in cast-in-place reinforced concrete. The bearing plate cap is designed in accordance with ICC-ES document AC358 as well as IBC, ACI, and AISC codes. Application of the cap varies by project and is the responsibility of registered design professional including minimum embedment for two-way and one-way punching shear, reinforcement of concrete, and pile spacing.

Additional information

Allowable Compression/ Tension (Tons)

16 Tons / 9 Tons

Ultimate Compression/Tension (Tons)

32 Tons / 18 Tons

Helical Pile Compatibility

http://www.magnumpiering.com/products/mh313b-helical-piles/
http://www.magnumpiering.com/products/mh325b-helical-piles/

Description

After installation of a Magnum Helical Pile to the correct depth, torque, and capacity, cut-off the pile shaft at the proper elevation Drill (1) 15/16” hole using a Magnum drill template. Place the pile cap over the shaft and secure with (1) 7/8” bolt. Ensure direct bearing of plate on shaft. Snug tighten nut. Place reinforcing steel as required for the project and cast concrete over and around the pile cap. Cap capacity is based on embedment in concrete pile cap at least 4x larger than plate size and minimum 2,500 psi concrete.