MHC1300-9O1313B3 Bearing Plate Cap Allowable Capacity 126 Tons

MHC1300-9O1313B3 bearing plate cap has 252 tons ultimate capacity, 126 tons allowable capacity in compression. 214 tons ultimate capacity, 107 tons allowable capacity in tension. The bearing plate cap consists of a collar tube with bolt hole for connection to Magnum helical piles. It includes a 13” x 13” x 7/8” plate for embedment in cast-in-place reinforced concrete. The bearing plate cap is designed in accordance with ICC-ES document AC358 as well as IBC, ACI, and AISC codes. Application of the cap varies by project and is the responsibility of registered design professional including minimum embedment for two-way and one-way punching shear, reinforcement of concrete, and pile spacing.

Categories: , , , , Tag:

Additional information

Allowable Compression/ Tension (Tons)

214 Tons / 107 Tons
Ultimate Compression/Tension Tons

252 Tons / 126 Tons
Helical Pile Compatibility

https://www.magnumpiering.com/products/mh939u-6-helical-piles/

Description

After installation of a MAGNUM® Helical Pile to the
correct depth, torque, and capacity, cut-off the pile shaft at the proper
elevation. Drill (3) 1-9/16” diameter holes through the shaft using a
MAGNUM® drill template, place the cap over the shaft and secure with
(3) 1-1/2” bolts. Snug tighten nut. Ensure direct bearing of plate on shaft.
Place reinforcing steel, cast concrete and consolidate around the pile cap
per project requirements.

Related products