MHC1420-3N11BR1 Tilted Plate Cap Allowable Capacity 25 Tons

Magnum MHC1420-3N11BR1 bearing plate cap has 50 tons ultimate capacity, 25 tons allowable capacity in compression. Including, 36 tons ultimate capacity, 18 tons allowable capacity in tension. The bearing plate cap consists of a collar tube with bolt holes for connection to Magnum helical piles. A 11”Ø x 3/4” plate battered 20° for attachment to a steel beam. The bearing plate cap is designed in accordance with ICC-ES document AC358 as well as IBC, ACI, and AISC codes. Application of the cap varies by project. It is the responsibility of registered design professional including beam attachment, beam shear, beam span, web stiffening, bracing, and pile spacing as applicable.

Additional information

Allowable Compression/ Tension (Tons)

25 Tons / 18 Tons

Ultimate Compression/ Tension (Tons)

50 Tons / 36 Tons

Compatibility

Description

After installation of a Magnum Helical Pile to the correct depth, torque, and capacity, cut-off the pile shaft at the proper elevation. Drill (1) 1-1/16” hole using a Magnum drill template. Place the pile cap over the shaft and secure with (1) 1” bolt. Snug tighten nut. Alternatively, drilling through pile may be omitted and plug welds may be used to secure cap to pile in place of bolts, Magnum Technical Bulletin TB004.0.