MP1008-3-6 Lifting Assembly Allowable Capacity 20 Tons

MP1008-3-6 Lifting Assembly consists of a lifting shoe and two square steel beams with holes for a pair of threaded rod attachments. MAGNUM® products are manufactured in the USA according to our ISO 9001 approved quality program. MAGNUM® brackets are designed in accordance with ICC-AC358, IBC, ACI, and AISC codes. Design and detailing of the connection to the structure varies by project and is the responsibility of the registered design professional including maximum concrete span, pier spacing, concrete shear, and concrete bearing.

Additional information

Configuration

Allowable Compression/Tension (Tons)

Compatibility

https://www.magnumpiering.com/products/mp1001-3-plate-bracket-allowable-capacity-25-tons/
https://www.magnumpiering.com/products/mp1002-3-angle-bracket-allowable-capacity-25-tons/
https://magnumpiering.com/products/mp1005-3-gusseted-angle-allowable-capacity-25-tons/
https://www.magnumpiering.com/products/mp1016-3-angle-bracket-w-tie-back-pile-allowable-capacity-25-tons/

Description

After installation of pier and bracket, attach lifting assembly (MP1008A-3) to the bracket underside using the bolt provided. Snug tighten nuts on top fixture. Attach second top fixture (MP1008B-3). Place a hydraulic power pack or bottle jack between the top fixtures and lift as required. Re-tighten nuts to secure pile and bracket position. Remove upper fixture (MP1008B-3) and re-use on other piles.

You may also like…