MP1029 Grout-Guide Micropile Bracket

MAGNUM® Grout-Guide Micropile Bracket consists of a steel angle and a large diameter collar tube for grouted connection to micropile casing. The steel angle can be attached to existing concrete using expansion anchors. MAGNUM® products are manufactured in the USA according to our ISO 9001 approved quality program. MAGNUM® brackets are designed in accordance with ICC-AC358, IBC, ACI, and AISC codes. Design and detailing of the connection to the structure varies by project and is the responsibility of the registered design professional including maximum concrete span, pier spacing, concrete shear, and concrete bearing.

SKU: MLIT1622017 Categories: , ,

Additional information

Fits Steel Micropile Casings:

5.5", 6", 6.625", 7", 7.625", 8.625"

Allowable Compression/Tension (Tons)

Allowable Compression/Tension (Kips)

Description

Excavate soil in area of bracket. Notch footing (if any) flush with foundation wall. Apply a grout bed of high strength, fast setting, non-shrink grout a minimum of 1/2” thick to the bottom angle face, then attach the bracket to the foundation with a minimum of (6) 5/8” concrete anchors. After grout sets, drill micropile through the center of the guide sleeve. Install desired reinforcing steel bar, grout and a 6 ft minimum length section of casing at the top of the micropile. Fill annular space between guide sleeve and micropile casing with high-strength, non-shrink grout. (Expansion Anchors Sold Separately)