MP1600-3 Concentric Lift Bracket Allowable Capacity 25 Tons
The Magnum® MP1600-3 Concentric Lift Bracket is designed for use with steel push piers jacked directly below the footing or load bearing wall for all types of foundation repairs. The cap has an 8˝ x 8˝ x 1/2˝ bearing plate for a total of 64 in2 of bearing area. Rather than costly and less stable multiple threadbars, the MHC1600-3 cap uses the same 3-1/8˝ collar lock-off technology as other Magnum push piering systems. Lock-off using one, two or three 3/4˝ ASTM A490 high strength bolts. The advantage of this system over others is in its simplicity and strength. More stable and easier to use, the MP1600-3 will provide long lasting support at an economic price.
Additional information
Connection Type | |
---|---|
Allowable Capacity (ton) by Connection Type | 5 Tons, 8 Tons, 14 Tons |
Ultimate Capacity (ton) by Connection Type | 10 Tons, 17 Tons, 28 Tons |
Configuration | |
Pile Size Compatibility | MP313, MP325 |
Description
Prepare the existing foundation. For steel push pier applications, prepare the structural steel for welding, then attach the bracket and Magnum ram. Install the push pier to the required pressure and load test. For helical pile applications, excavate the pier location so the helix bearing plates fit below the existing foundation and the shaft is as close as possible to the face of the foundation. Install the helical pile to the correct depth and torque. Prepare the structural steel for welding, then mount the bracket and install the sleeve. In both cases, lift the structure as needed using either a Magnum ram or lifting fixture. Drill holes and bolt the bracket to the pile.