MAGNUM® MP113 -36″ Slabjack Pier
High-Strength 1.31″ Diameter, 0.12″ Wall, Round-Shaft Slabjack Pier with Male-Female Slip Connectors
Data Sheet
Additional information
| Weight | 1 lbs |
|---|---|
| Dimensions | 1 × 1 × 1 in |
| Length (in) | 36 |
| Shaft | 1.31" Diam. ASTM A513 – 65KSI, or Equivalent. |
| Standard Ram | 3.14 in(2) Piston Area, 5, 000 Maximum PSI. (2, 500 Max PSI Installation Pressure) |
| Coupling | lnner 0.12" sleeve |
| Moment of Inertia | New= 0.08 in(4) |
| Gross Area | New= 0.45 in(2) |
| Section Modulus | New= 0.12 in(3) |
| Allow. Comp. Capacity (tons) | 2.6 |
| Coating |
Description
Magnum?MP113 slabjack piers have a structural capacity in compression of 5.1 Ions ultimate and 2.6 Ions allowable. Slabjack piers do not have tensile capacity unless the sections are welded together or a reinforcing steel bar and grout is placed in the pile casing. Sections couple together with male-female slip connectors. High strength steel offers increased buckling resistance compared lo others. A friction reduction collar can be added to the pile lo increase penetration depth. Sections are available in bare steel, epoxy powder coaled, and galvanized. Galvanized coaling extends average life expectancy to over 100 years even in highly corrosive environments. Custom lengths are available upon request. See Magnum? Technical Manual for additional information.
*Note 1: structural capacity is based on buckling strength of shat! in firm soils with pinned head conditions without corrosion (temporary short-?term applications). Push piers shall be installed to appropriate depth into suitable bearing stratum as determined by geotechnical engineer or local practice. For tension capacity, push pier sections must be welded together or a reinforcing steel bar and grout must be placed in the pile.
**Note 2: Push pier capacity is determined by load test using Magnum installation rams or lifting kit. All push piers shall be load tested to 1.5 times the desired working load. Test load is limited by maximum safe operating ram pressure or buckling capacity of shaft, whichever is less.
All Magnum Products Made in U.S.A.
U.S. Patents 6,058,662 and 5,234,287; Other Patents Pending. NOTE: Many items made to order. Bulk discounts available. Contact Magnum representative regarding price and availability.
