MHC1124-3 Wood Beam Cap Allowable Capacity 6 Tons
MHC1124-3 wood beam cap consist of a collar tube with bolt holes for connection to MAGNUM® helical piles and a circular bearing plate with an integrated nut. MAGNUM® products are manufactured in the USA according to our ISO 9001 approved quality program. Structural capacities are developed according to AISC 360 considering an average design life of 75 years for hot-dip galvanized steel in most soil conditions. Bare steel is available upon request. Design and detailing of the structure, to which bearing plate cap is attached varies by project. It is the responsibility of the registered design professional.
Additional information
Allowable Compression / Tension | 6 Tons / 6 Tons |
---|---|
Ultimate Compression / Tension | 12 Tons / 12 Tons |
Helical Pile Compatibility | https://www.magnumpiering.com/products/mh313b-helical-piles/ |
Description
After installation of a Magnum Helical Pile to the correct depth, torque, and capacity, cut-off the pile shaft at the proper elevation. Drill (1) 15/16” diameter hole through the shaft using a Magnum drill template. Place the pile cap over the shaft and secure with (1) 7/8” bolt. Snug tighten nut. Place wood beam on cap angle and secure with 1/2” lag bolts as required for the project. If required, install Magnum K-brace system in accordance with installation instructions for that product.
You may also like…
-
MH313B Helical Piles 18 Ton Ultimate – 9 Ton Allowable Capacity
Download Cut Sheet -
MH325B Helical Piles 33 Ton Ultimate – 16.5 Ton Allowable Capacity
Download Cut Sheet -
MH313BR Helical Piles 24 Ton Ultimate – 12 Ton Allowable Capacity
Download Cut Sheet -
MHLS1000 Boardwalk K-Bracing System
Download Cut Sheet